Panels & filler

WALNUT SHAKER CROWN MOLDING-W4" X H96"

WALNUT SHAKER COUNTERTOP MOLDING-W3/4" X D2" X H96"

WALNUT SHAKER CORNER LIGHT RAIL MOLDING-W2" X H6" Light rail molding for corners 6" long x 2" X High. This molding is mounted on wall cabinet bottoms to create a decorative effect and hide the under cabinet lighting.

WALNUT SHAKER 30" WALL DECORATIVE DOOR PANEL-W12" X H30" X D3/4"

WALNUT SHAKER 36" WALL DECORATIVE DOOR PANEL-W12" X H36" X D3/4"

WALNUT SHAKER 42" WALL DECORATIVE DOOR PANEL-W12" X H42" X D3/4"

WALNUT SHAKER 30" BASE DECORATIVE DOOR PANEL-W24" X H30" X D3/4"

WALNUT SHAKER DOOR MOLDING-W11/16" X D1/4" X H96"

WALNUT SHAKER DISHWASHER END PANEL LEFT-W24" X H34.5" X D3/4" with a 2" wide return. Left side. This panel is most commonly used to cover exposed dishwasher sides.

WALNUT SHAKER DISHWASHER END PANEL RIGHT-W24" X H34.5" X D3/4" with a 2" wide return. Right side. This panel is most commonly used to cover exposed dishwasher sides.

WALNUT SHAKER OUTSIDE CORNER MOLDING-W7/8" X H96" This molding is commonly used to finish exposed cabinet edges on islands and peninsulas.

WALNUT SHAKER 24" FINISHED PANEL -W24" X H96" X D3/4" Finished edge at all sides.

WALNUT SHAKER 35" FINISHED PANEL -W35" X H96" X D3/4" Finished edge at all sides.

WALNUT SHAKER 48" FINISHED PANEL -W48" X H96" X D3/4" Finished edge at all sides.

WALNUT SHAKER QUARTER ROUND MOLDING-W3/4" X H96" This molding is commnly used along cabinet toe kicks and sides when there are gaps between base cabinets and floor.

WALNUT SHAKER 30" WALL FLUTED FILLER-W3" X H30"

WALNUT SHAKER 36" WALL FLUTED FILLER-W3" X H36"

WALNUT SHAKER 42" WALL FLUTED FILLER-W3" X H42"

WALNUT SHAKER 96" WALL FLUTED FILLER-W3" X H96"

WALNUT SHAKER SCRIBE MOLDING-W3/4" X H96" This molding has many uses, some them are decorating cabinet sides and bottoms, using between cabinets and walls or ceilings where a clearance is required, covering wall and ceiling imperfections and other uses.

WALNUT SHAKER TOE KICK-W4-1/2" X H96" Kitchen and bathroom cabinets come with structural toe kicks. We recommend installing this toe kick over the structural toe kicks. It will cover small seams between the cabinet toe kicks and make the toe kick area one solid surface.

WALNUT SHAKER 36" VALANCE-W36" X H4D3/4" Valances are commonly used to decorate wide gaps between wall cabinets. For example, a gap between two cabinets above a sink.

WALNUT SHAKER 42" VALANCE-W42" X H4D3/4" Valances are commonly used to decorate wide gaps between wall cabinets. For example, a gap between two cabinets above a sink.

WALNUT SHAKER 48" VALANCE-W48" X H4D3/4" Valances are commonly used to decorate wide gaps between wall cabinets. For example, a gap between two cabinets above a sink.

WALNUT SHAKER 60" VALANCE-W60" X H4D3/4" Valances are commonly used to decorate wide gaps between wall cabinets. For example, a gap between two cabinets above a sink.

WALNUT SHAKER HIGH VALANCE 36"-W36" X H12" Valances are commonly used to decorate wide gaps between wall cabinets. For example, a gap between two cabinets above a sink.

WALNUT SHAKER HIGH VALANCE 42"-W42" X H12" Valances are commonly used to decorate wide gaps between wall cabinets. For example, a gap between two cabinets above a sink.

WALNUT SHAKER HIGH VALANCE 48"-W48" X H12" Valances are commonly used to decorate wide gaps between wall cabinets. For example, a gap between two cabinets above a sink.